Latest News
Enform 2010 Annual Golf Classic
On August 18th, ComplyWorks was a proud sponsor and participant in the Enform 2010 Annual Golf Classic in support of the Walt Gabert and Paul Schoenhals Scholarship Fund. With a $10,000.00 Hole-in-One prize being offered, golfers enjoyed the challenge at hole #12 but, unfortunately, no one was victorious. In lieu of the Hole-in-One prize, a draw was held for a $100.00 gift card with Art Brochu of AJB Developments winning the prize. Congratulations and thank you to all participants and Enform for a wonderful day of golf and for supporting petroleum technology education.
7/23/2010
ComplyWorks Customer Support Representatives Are All Smiles
A few of the ComplyWorks Customer Support Representatives are all smiles as they enjoy a lovely floral arrangement sent by a ComplyWorks' Contractor Member who appreciated the excellent customer service he received. "We are always happy to give our best assistance and are overwhelmed when a job well done is recognized with such an act of kindness!" stated Sheryl, one of our Customer Support Representatives.
.jpg)
7/22/2010
PSAC Education Fund Golf Classic
ComplyWorks was pleased to be a Hole-In-One sponsor of the Petroleum Services Association of Canada (PSAC) Education Fund Golf Classic held on July 22nd at the Calgary Elks Lodge and Golf Club. While no one was able to walk away with the $10,000.00 Hole-In-One prize, congratulations go out to Raj Kapoor of CIBC on winning our draw prize for a $100.00 gift certificate.
Shown above, filling in ballots at the ComplyWorks' Hole-In-One table are: (Left) - Derek Hammerlindl of Devon Canada Corporation; (Middle) - Jason Ogilvie of Stream-Flo Industries Ltd. and (Right) - Travis Stephenson of Trident Exploration.
10/22/2009
Contractor User Group - Fort McMurray, AB
Thanks to the people in attendence on the October 22, 2009 Contractor User Group in Fort McMurray, AB
User groups help the Contractors understand how Employer members are using Relevant Compliance monitoring as a way to improve their Contractor Management process.
10/21/2009
Contractor User Group - Leduc/Nisku, AB
User groups help the Contractors understand how Employer members are using Relevant Compliance monitoring as a way to improve their Contractor Management process.
Wednesday October 21, 2009 there was a Contractor User Group in Leduc, AB
This informative session highlighted the evolvement of the Registry into ComplyWorks Ltd. and how we are working with industry to understand and use relevant compliance monitoring tools with active communications.
9/24/2009
Oilweek's Producer & Supplier of the Year for 2009
After a summer of nominations and voting Oilweek will acknowledge the winners of the Producer and the Supplier of the Year awards on November 25 as part of their Annual Report Awards luncheon.
Oilweek will feature the winner of the Supplier of the Year in their November issue and the Producer of the Year will be featured in their December issue.
For more information, please go to: http://www.oilweek.com/poysoy/
Contractor User Group - Rocky Mountain House, AB
October 28, 2009
Congratulations to Misty Tabert for winning our Rocky Mountain House, AB User Group Session giftcard giveaway!
Misty Tabert (left) of Strad Compression & Production Services Ltd. accepts her prize from Darcy McFeetors (Right) Director, Business Development with ComplyWorks Ltd.
Contractor User Group - Calgary, AB
Keith Podmoroff (right), of Mission Geospatial Ltd. accepts his prize from Ross Wickware (left), VP Products & Marketing of ComplyWorks Ltd.
There was a successful turn out at the Complyworks Contractor User Group Session in Calgary, AB on October 14, 2009. We would like to thank all who attended. Also, congratulations to Keith Podmoroff of Mission Geospatial Ltd. for winning our $50 giftcard giveaway.
Contractor User Group - Weyburn, SK
Wednesday November 4, 2009 ComplyWorks hosted a Contractor User Group in Weyburn, SK
Leon Gilbertson (Left) of R. French Transport Ltd. accepts his prize from Janet Preston (Right) Business Integration Co-ordinator of ComplyWorks Ltd.
Contractor User Group - Grande Prairie, AB
Contractors learned about Compliance Management, becoming Compliant, and showing Employers they're "Ready to Work!"
Wednesday November 18, 2009 we hosted a Contractor User Group in Grande Prairie, AB. Thank you for all those who particpated!
Kim Rekowski (Right) from Gemini Helicopters Inc. won our giftcard giveaway! Kim is pictured here with Darcy McFeetors (Left) Director, Business Development of ComplyWorks Ltd. Congratulations!
ENFORM eLearning Courses
Today we are very pleased to announce our partnership agreement with ENFORM. We will be offering the complete suite of ENFORM eLearning Courses through ComplyWorks.com early in the new year.
Safety Stand Down
Please note that the following information is taken by permission from Enform and can be found at http://www.safetystanddown.ca/safetystanddown/About
About Safety Stand Down 
(Previously known as Safety Stand Down Week)
What is it?
Safety Stand Down is a designated time for CEOs, executives, and senior managers to talk about safety issues directly with frontline workers.
When is it?
Safety Stand Down usually takes place during a focus week in the third week of January of each year. However, this time frame is only a suggestion. You should choose a time frame that works best for your organization. The important thing is to make time for safety - no matter when that might be.
Why should you participate?
Frontline workers are generally the largest group in the workforce. Most recordable incidents and injuries occur within this group - particularly among new workers. Too often, the safety messages that trickle down to this group become diluted. However, when senior management takes the time to discuss safety issues "in person" during Safety Stand Down, this group is more likely to pay attention.
Who can participate?
Past participants have included oil and gas producers, explorers, and service contractors. However, the concept can apply to company in any industry and in any country.
Where should you visit?
The worksite location for your Safety Stand Down event is entirely up to you. Some executives choose plants or permanent sites, while others visit temporary sites such as drilling and service rig operations. The best advice is to go where you'll have the greatest impact.
Do you have to shut down your operations?
It's not necessary to shut down operations. But, if you do shut down the operation you intend to visit for an hour or a day, your safety commitment to the frontline workers is reinforced.
How to Participate
- Plan - Get everything set up and ready for your event. Develop a plan for your field visits. Request tools (stickers, etc) from Enform.
- Visit - Visit your frontline workers as planned.
- Provide Feedback to Enform - Complete Enform's online feedback form (http://www.safetystanddown.ca/safetystanddown/Feedback) after you conduct your Safety Stand Down event.
NEW - Contractor Employer Service Launch - The CE Combined Membership
NEW - Contractor Employer Service Launch - The CONTRACTOR EMPLOYER (CE) COMBINED MEMBERSHIP
- DO YOU MANAGE SUB-CONTRACTORS?
- ARE YOUR EMPLOYERS DEMANDING THAT YOU HAVE YOUR SUB-CONTRACTOR'S DATA?
- DO YOU MANAGE OR WORK WITH 10, 50, 100, 500 SUB-CONTRACTORS?
Due to overwhelming demand from our contractor community to be able to view
and report on their sub-contractors' Health & Safety data, Complyworks is pleased to offer our
new solution the Contractor Employer (CE) combined membership.
A CE combined membership will save you money, significant administration time
as well as reduce your risk and exposure to liability.
CE Combined Membership (an upgrade to your existing membership) Includes :
- Contractor membership - post your data as a contractor
- Employer membership - view/access your sub-contractors' data
- Support - Help Desk Customer Support
- Training - web based and through the Help Desk
- Account Set-up and Management - If greater than 100 contractors includes an assigned Account Manager for training and support
$1995 per year if you manage less than 100 contractors
$4995 per year if you manage more than 100 contractors
Over 500 contractors requires quote from ComplyWorks
UPGRADE BEFORE MAY 30 AND RECEIVE ALERTWORKS INCLUDED THE FIRST YEAR FOR FREE
AlertWorks - if your sub-contractors become non-compliant, you receive a notification alert telling you why ($300 value)
Prove to your Employers that you are managing/working with your sub-contractors to ensure compliance.
Phone Jordan at ComplyWorks to order your upgrade CE combined membership - 403 984 6055
SAVE MONEY
REDUCE RISK
Send a note for a quote to CE@complyworks.com
ComplyWorks; listening to you, our members, putting Employers,
Contractors and Employees to Work
Come See us in Banff at the EnForm PSC Conference on May 4th - 6th
Booth #57 upper level room 224, The Banff Centre
Enhancements Have Been Made to the THRIL WHMIS and TDG Certificates
In an effort to more accurately identify the holder of specific safety training certificates, enhancements have been made to the THRIL WHMIS and Transportation of Dangerous Goods (TDG) certificates. Please be advised that the certificates for WHMIS and TDG have been modified to include:
- Recertification requirements, and a
- Detailed wallet-sized certificate.
If you have mastered the THRIL WHMIS Course and/or the TDG Course through the CourseWorks training system, we advise you to log into the ComplyWorks system and re-print a copy of your recently updated certificates.